Veljed

XL rim tape from Federal. Made to fit XL rims.

2pc set

The Stance pro rim is the same width and dimension as the previous popular Stane XL rim but with updated graphics and eyelets on the spoke holes to reinforce strength and reduce the risk of pulling spokes through.

Specs:

• Seam: Welded
• ERD: 394mm
• Height: 15mm
• Width: 40mm
• Weight: TBC

The Federal Stance XL rim has a wider (40mm) cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger and stiffer than conventional rims and also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% to reduce the possibility of spokes pulling through the rim.

We have also changed the material from Aluminium 6061 to 6066 which increases the strength by approximately 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance .The internal sidewall height is also reduced to keep the tyre firmly in place when inflated and the base of the rim is sunken to ease the installation and removal of tyres.

More Info:

• New contemporary design using  triple box section
• Wider profile rim (40mm)
• Lower profile shape (15mm)
• Aluminium 6066 material
• Increased wall thickness around spoke holes
• Wider spoke layout makes it easier to build the rim and tighten the spokes
• Includes new 35mm wide XL rim tape
• Available in Matt Black

Specs:

• Seam: Welded
• ERD: 394mm
• Height: 15mm
• Width: 40mm
• Weight: 524g / 18.5oz

Double-wall design with 2 vertical ribs and welded seam for more rigidity. Extra drilling on inner wall to reduce weight.