Following on from the success of the Federal freecoaster they felt the time was right to introduce their own cassette hub. The new Federal cassette hub is available as a male 14mm option or as a female axle version that uses a hollow 17mm axle and 14mm bolts that are much stronger than the regular 14mm axle. Both hubs have been designed so that all the hardware is interchangeable, so you can convert a female hub to a Male and vice versa simply by swapping the axles.
Available in 9T only
Available in Male 14mm or as a female axle with 14mm bolts that have 8mm allen key bolts on the end as well as the standard 17mm socket end.
3 pawl rachet
Includes NDS and DS (Drive side) matt black plastic guards with recessed logo and hubguard specific cone nuts.
Federal freecoaster hub V4 now with hubguards. This hub uses the same technology as the previous versions with the spacers for an adjustable gap with updated reliable hardware. Comes in 9t only
When ordering let us know in the special instructions whether you would like the gap setup either x-large, large, medium or small and we can adjust this for you. Federal freecoasters are very tricky to adjust and we only recommend adjusting if you know what your doing.
All new Rolls V2 now featuring the all new Switch Drive System (SDS), which allows the 1-pc driver to flip pawls from RHD to LHD. 14mm heat-treated female/ male axle w/ allen insert for easy removal. 2 large sealed bearings (#6902) in the 6061 T6 shell. Polymer bushing sleeve in driver that protects smaller geared drivers from bearing blow-outs.
body and axle material Al 7075
2 precision Japan sealed bearings
for 17 mm wrench / 6 mm allen key
2 CrMo screws diameter 3/8″ | 10 mm
flange diameter 47 mm
weight 195 g (including screws)